BJDNZ - CORVEL (R) COATING POWDER 70-7002

  • MSDS: BJDNZ
  • Manufacturer: MORTON INTERNATIONAL
  • Product Name: CORVEL (R) COATING POWDER 70-7002
  • National Stock Number: 8010-01-120-9502
Product Identification

Product ID:CORVEL (R) COATING POWDER 70-7002
MSDS Date:02/12/1990
FSC:8010
NIIN:01-120-9502
MSDS Number: BJDNZ

Responsible Party
MORTON INTERNATIONAL
READING, PA 19612
US

Emergency Phone: 215/775-6737

Info Phone: 215/775-6737

Preparer: OSHA HAZARD COMM COORD

Cage: 0ASW6

Contractor
MORTON INTERNATIONAL
READING, PA 19612 US

Telephone: 215/775-6737

Cage: 0ASW6

Ingredients

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MECHANICAL IRRITATION AND DUST LOADING
OF LUNG AND EYE. PROLONGED EXPOSURE TO CACO*3 W/O APPROPRIATE
RESPIRATORY PROTECTION FOR RESPIRABLE DUST MAY CAUSE SILICOSIS.
Explanation of Carcinogenicity:AS A NATURAL PRODUCT,CACA*3 MAY CONTAIN
UP TO 1% CRYSTALLINE SILICA WHICH IS CONSIDERED A CARCINOGEN
Effects of Overexposure:REDUCED VISIBILITY, UNPLEASANT DEPOSITS IN EYES
AND NASAL PASSAGES, INJURY TO SKIN AND MUCOUS MEMBRANE BY CHEMICAL
OR MECHANICAL ACTION (RIGOROUS SKIN CLEANSING)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION:GIVE WATER IF LGE AMTS OF MATERIAL SWALLOWED.IF
UNCON,GIVE NOTHING BY MOUTH. CALL MD. EYES:FLUSH THOROUGHLY(ENTIRE
EYE SURFACE AND LID)W/WATER FOR 15 MIN. SKIN:FLUSH W/WATER FOR
SEVERAL MINU TES.REMOVE AND CLEANCONTAMINATED CLOTHING AND SHOES.
INHAL:REMOVE TO FRESH AIR IN ALL CASES. IF IRRITATION, GET MD.

Fire Fighting

Lower Limits:30-70 GM/M3
Extinguishing Media:FOAM, CARBON DIOXIDE, WATER, DRY CHEMICAL
Fire Fighting Procedures:PROD OF COMBUST MAY BE TOXIC;AVOID BREATHING
FUMES.DO NOT ENTER CONFINED SPACE W/O FULL BUNKER GEAR INCLDG POS
PRESS NIOSH SCBA.COOL FIRE EXPOSED CONTRS W/WATER
Unusual Fire/Explosion Hazard:DUST CAN FORM AN EXPLOSIVE MIX W/AIR.
ELIMINATE SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:SMALL:USE VACUUM EQUIP APPROVED FOR COLLECTING
DUSTS IN HAZARDOUS LOCATIONS. IF SWEEPING, DO SO CAREFULLY TO
MINIMIZE DUST.UNCONTAMINATED MATERIAL CAN BE REUSED. CONTAMINATED
MATERIAL SHOULD BE PLACED IN RECEPTACLE FOR DISPOSAL
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:HANDLE IN MANNER AS TO MINIMIZE DUST
CONCENTRATION. PREVENT INHALTN & CONTACT OF POWDER.AVOID INHALATION
OF FUMES DURINGCURING.SEE OTHER PRECAUTIONS
Other Precautions:KEEP POWDER AWAY FROM SPARKS AND FLAMES. STORE IN DRY
LOCATION AT ROOM TEMP.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR W/HEPA FILTER
OR OTHER APPROPRIATE RESPIRATORY DEVICE FOR PARTICULATES.
Ventilation:LOCAL EX VENT.PROPERLY VENT CURING OVENS.VENT
EQUIP,BAGHOUSE& CYCLONE DUST COLLECT SYS TO BE EXPL PROOF AND
GROUNDED.
Protective Gloves:PERMEATION RESISTANT GLOVES
Eye Protection:DUST-PROOF GOGGLES.SEE OTHER PROT.EQUIP.
Other Protective Equipment:WEAR SAFETY GOGGLES IN GEN INDUSTRIAL
AREAS.WEAR APPROPRIATE,CLEAN PROTECTIVE
CLOTHING(I.E.COVERALLS,SMOCKS,APRONS,HATS)
Work Hygienic Practices:DO NOT EAT OR SMOKE NEAR POWDER. WASH
THOROUGHLY BEFORE EATING AND SMOKING.
Supplemental Safety and Health
THIS PRODUCT DOES NOT CONTAIN REPORTABLE AMOUNTS OF CHEMICALS SUBJECT
TO ANNUAL SARA REPORTING.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:>302F,>150C
Spec Gravity:>1.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINELY DIVIDED POWDER-SLIGHT, IF ANY, ODOR
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS (I.E. HYDROCHLORIC, SULFURIC) STRONG OXIDIZERS
Stability Condition to Avoid:ELIMINATE SOURCES OF IGNITION
Hazardous Decomposition Products:OXIDES OF N AND C EXPECTED AS RESULT
OF COMBUST W/LGE AMTS OF AIR.IN POORLY VENT COMBUST, UNCHARACT MIX
OF ORGANIC CMPDS

Disposal

Waste Disposal Methods:PLACE COLLECTED MATERIAL INTO A CLOSED CONTAINER
AND DISPOSEIN A SUITABLE LANDFILL I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.